56 lines
2.2 KiB
Markdown
56 lines
2.2 KiB
Markdown
# Betalupi Ergodox
|
|
|
|
This is a modified version of the [ZSA ErgoDox firmware](https://git.betalupi.com/mirrors-QMK/zsa_firmware), based on the `ergodox_ex/glow` keyboard.
|
|
|
|
--------------------------------------------------------------------------------
|
|
# Setup
|
|
|
|
Clone this repo into `keyboards/betalupi_ergodox` in your qmk directory.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make betalupi_ergodox:default:flash
|
|
|
|
|
|
If you get array-bounds errors on build, you may have a bad avr-gcc version. Read [this issue](https://github.com/qmk/qmk_firmware/issues/17064), and try
|
|
|
|
AVR_CFLAGS="-Wno-array-bounds"
|
|
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
|
|
|
|
|
|
|
--------------------------------------------------------------------------------
|
|
# Notes from ZSA
|
|
|
|
## Oryx Configuation
|
|
|
|
If you have `ORYX_CONFIGURATOR` defined in your keymap's `config.h`, this enables a number of the built in options from the Oryx Configurator.
|
|
|
|
|
|
### Indicator LEDs
|
|
|
|
You can use the `LED_LEVEL` keycode to cycle through the brightness levels for the LEDs on the top right of the keyboard. These settings are saved in eeprom (persistant memory).
|
|
|
|
Alternatively, you can set the brightness by calling the following functions:
|
|
|
|
```c
|
|
void ergodox_led_all_set(uint8_t level);
|
|
void ergodox_right_led_1_set(uint8_t level);
|
|
void ergodox_right_led_2_set(uint8_t level);
|
|
void ergodox_right_led_3_set(uint8_t level);
|
|
```
|
|
|
|
These settings are not persistent, so you'd need to reset it every time the board starts.
|
|
|
|
These are on a 0-255 scale
|
|
|
|
### RGB Matrix Features
|
|
|
|
If you're using the Smart LED (layer indication) feature from the Oryx Configurator, you want to make sure that you enable these options by adding `#define ORYX_CONFIGURATOR` to your keymap's `config.h`.
|
|
|
|
This changes the `RGB_TOG` keycode so that it will toggle the lights on and off, in a way that will allow the Smart LEDs to continue to work, even with the rest of the LEDs turned off.
|
|
|
|
Additionally, a new keycode has been added to toggle the Smart LEDs. Use `TOGGLE_LAYER_COLOR`, if you aren't already.
|