Cleaned up vim config

master
Mark 2022-08-03 10:51:44 -07:00
parent f5cdff4a86
commit b76ae2c541
Signed by: Mark
GPG Key ID: AD62BB059C2AAEE4
2 changed files with 187 additions and 193 deletions

111
defaults.vim Normal file
View File

@ -0,0 +1,111 @@
" Use Vim settings, rather than Vi settings (much better!).
" This must be first, because it changes other options as a side effect.
" Avoid side effects when it was already reset.
if &compatible
set nocompatible
endif
" When the +eval feature is missing, the set command above will be skipped.
" Use a trick to reset compatible only when the +eval feature is missing.
silent! while 0
set nocompatible
silent! endwhile
" Allow backspacing over everything in insert mode.
set backspace=indent,eol,start
set history=200 " keep 200 lines of command line history
set ruler " show the cursor position all the time
set showcmd " display incomplete commands
set wildmenu " display completion matches in a status line
set ttimeout " time out for key codes
set ttimeoutlen=100 " wait up to 100ms after Esc for special key
" Show @@@ in the last line if it is truncated.
set display=truncate
" Show a few lines of context around the cursor. Note that this makes the
" text scroll if you mouse-click near the start or end of the window.
set scrolloff=5
" Do incremental searching when it's possible to timeout.
if has('reltime')
set incsearch
endif
" Do not recognize octal numbers for Ctrl-A and Ctrl-X, most users find it
" confusing.
set nrformats-=octal
" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries.
if has('win32')
set guioptions-=t
endif
" Don't use Ex mode, use Q for formatting.
" Revert with ":unmap Q".
map Q gq
" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo,
" so that you can undo CTRL-U after inserting a line break.
" Revert with ":iunmap <C-U>".
inoremap <C-U> <C-G>u<C-U>
" In many terminal emulators the mouse works just fine. By enabling it you
" can position the cursor, Visually select and scroll with the mouse.
" Only xterm can grab the mouse events when using the shift key, for other
" terminals use ":", select text and press Esc.
if has('mouse')
if &term =~ 'xterm'
set mouse=a
else
set mouse=nvi
endif
endif
" Switch syntax highlighting on when the terminal has colors or when using the
" GUI (which always has colors).
if &t_Co > 2 || has("gui_running")
" Revert with ":syntax off".
syntax on
" I like highlighting strings inside C comments.
" Revert with ":unlet c_comment_strings".
let c_comment_strings=1
endif
" Only do this part when Vim was compiled with the +eval feature.
if 1
" Enable file type detection.
" Use the default filetype settings, so that mail gets 'tw' set to 72,
" 'cindent' is on in C files, etc.
" Also load indent files, to automatically do language-dependent indenting.
" Revert with ":filetype off".
filetype plugin indent on
" Put these in an autocmd group, so that you can revert them with:
" ":augroup vimStartup | au! | augroup END"
augroup vimStartup
au!
" When editing a file, always jump to the last known cursor position.
" Don't do it when the position is invalid, when inside an event handler
" (happens when dropping a file on gvim) and for a commit message (it's
" likely a different one than last time).
autocmd BufReadPost *
\ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit'
\ | exe "normal! g`\""
\ | endif
augroup END
endif
if has('langmap') && exists('+langremap')
" Prevent that the langmap option applies to characters that result from a
" mapping. If set (default), this may break plugins (but it's backward
" compatible).
set nolangremap
endif

251
vimrc
View File

@ -1,116 +1,8 @@
" __ ___ ____ __ _ _
" \ \ / (_)_ __ ___ | _ \ ___ / _| __ _ _ _| | |_ ___
" \ \ / /| | '_ ` _ \ | | | |/ _ \ |_ / _` | | | | | __/ __|
" \ V / | | | | | | | | |_| | __/ _| (_| | |_| | | |_\__ \
" \_/ |_|_| |_| |_| |____/ \___|_| \__,_|\__,_|_|\__|___/
" Default Vim options. Some have been modified.
" These used to be loaded through 'source $VIMRUNTIME/defaults.vim'
source ~/.vim/defaults.vim
" Use Vim settings, rather than Vi settings (much better!).
" This must be first, because it changes other options as a side effect.
" Avoid side effects when it was already reset.
if &compatible
set nocompatible
endif
" When the +eval feature is missing, the set command above will be skipped.
" Use a trick to reset compatible only when the +eval feature is missing.
silent! while 0
set nocompatible
silent! endwhile
" Allow backspacing over everything in insert mode.
set backspace=indent,eol,start
set history=200 " keep 200 lines of command line history
set ruler " show the cursor position all the time
set showcmd " display incomplete commands
set wildmenu " display completion matches in a status line
set ttimeout " time out for key codes
set ttimeoutlen=100 " wait up to 100ms after Esc for special key
" Show @@@ in the last line if it is truncated.
set display=truncate
" Show a few lines of context around the cursor. Note that this makes the
" text scroll if you mouse-click near the start or end of the window.
set scrolloff=5
" Do incremental searching when it's possible to timeout.
if has('reltime')
set incsearch
endif
" Do not recognize octal numbers for Ctrl-A and Ctrl-X, most users find it
" confusing.
set nrformats-=octal
" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries.
if has('win32')
set guioptions-=t
endif
" Don't use Ex mode, use Q for formatting.
" Revert with ":unmap Q".
map Q gq
" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo,
" so that you can undo CTRL-U after inserting a line break.
" Revert with ":iunmap <C-U>".
inoremap <C-U> <C-G>u<C-U>
" In many terminal emulators the mouse works just fine. By enabling it you
" can position the cursor, Visually select and scroll with the mouse.
" Only xterm can grab the mouse events when using the shift key, for other
" terminals use ":", select text and press Esc.
if has('mouse')
if &term =~ 'xterm'
set mouse=a
else
set mouse=nvi
endif
endif
" Switch syntax highlighting on when the terminal has colors or when using the
" GUI (which always has colors).
if &t_Co > 2 || has("gui_running")
" Revert with ":syntax off".
syntax on
" I like highlighting strings inside C comments.
" Revert with ":unlet c_comment_strings".
let c_comment_strings=1
endif
" Only do this part when Vim was compiled with the +eval feature.
if 1
" Enable file type detection.
" Use the default filetype settings, so that mail gets 'tw' set to 72,
" 'cindent' is on in C files, etc.
" Also load indent files, to automatically do language-dependent indenting.
" Revert with ":filetype off".
filetype plugin indent on
" Put these in an autocmd group, so that you can revert them with:
" ":augroup vimStartup | au! | augroup END"
augroup vimStartup
au!
" When editing a file, always jump to the last known cursor position.
" Don't do it when the position is invalid, when inside an event handler
" (happens when dropping a file on gvim) and for a commit message (it's
" likely a different one than last time).
autocmd BufReadPost *
\ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit'
\ | exe "normal! g`\""
\ | endif
augroup END
endif
" Convenient command to see the difference between the current buffer and the
" file it was loaded from, thus the changes you made.
@ -121,22 +13,6 @@ if !exists(":DiffOrig")
\ | wincmd p | diffthis
endif
if has('langmap') && exists('+langremap')
" Prevent that the langmap option applies to characters that result from a
" mapping. If set (default), this may break plugins (but it's backward
" compatible).
set nolangremap
endif
if has("vms")
set nobackup " do not keep a backup file, use versions instead
else
@ -146,6 +22,14 @@ else
endif
endif
" Don't clutter directories with swap files.
" Save them in /tmp instead.
set backupdir=/tmp//,.
set directory=/tmp//,.
set undodir=/tmp//,.
if &t_Co > 2 || has("gui_running")
" Switch on highlighting the last used search pattern.
set hlsearch
@ -160,13 +44,6 @@ endif
"augroup END
" _ _ _ _ _ _
" / \ __| | __| | ___ __| | | (_)_ __ ___ ___
" / _ \ / _` |/ _` |/ _ \/ _` | | | | '_ \ / _ \/ __|
" / ___ \ (_| | (_| | __/ (_| | | | | | | | __/\__ \
" /_/ \_\__,_|\__,_|\___|\__,_| |_|_|_| |_|\___||___/
" All text below is not from the default vimrc.
" Enable syntax highlighting if the terminal supports color
if &t_Co > 1
@ -187,69 +64,80 @@ set numberwidth=4
"set relativenumber
" Display invisible characters.
" Show tabs as '<--->', and trailing spaces as '·'
" Here's a helpful list of chars:
" ␠ ⎵ ⏎ ·
set list
" set listchars=tab:<->,trail:·
set listchars=tab:\|\ \|,trail,nbsp:⎵
" Special char list: ␠⎵⏎
" Don't clutter directories with swap files.
" Save them in /tmp instead.
set backupdir=/tmp//,.
set directory=/tmp//,.
set undodir=/tmp//,.
" _ __ __ __ _
" | |/ /___ _ _ | \/ | __ _ _ __ _ __ (_)_ __ __ _ ___
" | ' // _ \ | | | | |\/| |/ _` | '_ \| '_ \| | '_ \ / _` / __|
" | . \ __/ |_| | | | | | (_| | |_) | |_) | | | | | (_| \__ \
" |_|\_\___|\__, | |_| |_|\__,_| .__/| .__/|_|_| |_|\__, |___/
" |___/ |_| |_| |___/
" Custom keybinds and commands
" Configure and load conceal chars
"
"set conceallevel=0 " Nothing is hidden
"set conceallevel=1 " Hide stuff as concealchar, or as listchar.
"set conceallevel=2 " Hide stuff as concealchar, or completely.
"set conceallevel=3 " Hide completely.
"
"syntax keyword ConcealedX kw_hide_x conceal concealchar=x
"syntax keyword ConcealedY kw_hide_y conceal concealchar=y
"syntax keyword ConcealedMe kw_hide_me conceal
"syntax keyword NoConceal kw_normal
"
"highlight ConcealedX ctermfg=2
"highlight ConcealedY ctermfg=3
"highlight ConcealedMe ctermfg=4
"highlight NoConceal ctermfg=5
"
:set conceallevel=2
highlight Conceal ctermbg=NONE ctermfg=green guibg=NONE guifg=NONE
source ~/.vim/conceal.vim
" jh to escape in insert mode, 'cuz esc is hard to reach.
inoremap jh <Esc>
" Map F5 to clear all trailing whitespace in normal mode.
" the _s variable is used to preserve the search pattern register.
nnoremap <silent> <F5> :let _s=@/ <Bar> :%s/\s\+$//e <Bar> :let @/=_s <Bar> :nohl <Bar> :unlet _s <CR>
" jh to escape in insert mode, esc is hard to reach.
"inoremap jh <Esc>
" Map Ctrl-k to toggle invisibles in normal mode
nnoremap <C-k> :set list! <CR>
" Clears trailing whitespace while preserving cursor.
function StripTrailingWhitespaces()
let l = line(".")
let c = col(".")
%s/\s\+$//e
call cursor(l, c)
endfun
" A command that makes figlet titles
command -nargs=1 F :r !figlet <q-args><CR>
command -nargs=1 Ff :r !figlet -f small <q-args><CR>
augroup clearwhitespace_gp
autocmd!
autocmd BufWritePre * :call StripTrailingWhitespaces()
augroup END
" Toggle invisibles in normal mode
nnoremap <F3> :set list! <CR>
" Tab size shortcuts
" TODO: VSCode-like tab menu
nnoremap <C-p> :set tabstop=4 shiftwidth=4 noexpandtab<CR>
nnoremap <C-o> :set tabstop=8 shiftwidth=8 noexpandtab<CR>
" Autodetect filetypes and set proper indentation
" Default: 8
:set tabstop=8 shiftwidth=8 noexpandtab
:autocmd Filetype py setlocal tabstop=4 shiftwidth=4 noexpandtab
:autocmd Filetype lua setlocal tabstop=4 shiftwidth=4 noexpandtab
" Default: 4, with tabs.
set tabstop=4 shiftwidth=4 noexpandtab
augroup tabsize_gp
autocmd!
autocmd Filetype py setlocal tabstop=4 shiftwidth=4 noexpandtab
autocmd Filetype lua setlocal tabstop=4 shiftwidth=4 noexpandtab
augroup END
" ____ _ _
" | _ \| |_ _ __ _(_)_ __ ___
" | |_) | | | | |/ _` | | '_ \/ __|
" | __/| | |_| | (_| | | | | \__ \
" |_| |_|\__,_|\__, |_|_| |_|___/
" |___/
" Plugins
call plug#begin()
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-goyo.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-gitgutter.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-nerdtree.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-hexHighlight.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-pencil.git'
"Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-wordchipper.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-boxdraw.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-goyo.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-gitgutter.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-nerdtree.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-hexHighlight.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-pencil.git'
"Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-wordchipper.git'
Plug 'ssh://git@git.betalupi.com:33/mirrors/vim-boxdraw.git'
call plug#end()
@ -263,7 +151,6 @@ endif
nmap <F2> <Plug>ToggleHexHighlight
"filetype plugin on " may already be in your .vimrc
let g:pencil#textwidth = 70
augroup pencil
@ -276,7 +163,3 @@ augroup END
" Configure and load conceal chars
:set conceallevel=2
highlight Conceal ctermbg=NONE ctermfg=green guibg=NONE guifg=NONE
source ~/.vim/conceal.vim