160 lines
5.7 KiB
TeX
160 lines
5.7 KiB
TeX
\section{Balance}
|
|
|
|
\example{}
|
|
Consider a mass $m_1$ on top of a pin in two-dimensional space. \par
|
|
Due to gravity, the mass exerts a force on the pin at the point of contact. \par
|
|
For simplicity, we'll say that the magnitude of this force is equal the mass of the object---
|
|
that is, $m_1$.
|
|
\begin{center}
|
|
\begin{tikzpicture}[scale=2]
|
|
\fill[color = black] (0, 0.1) circle[radius=0.1];
|
|
\node[above] at (0, 0.20) {$m_1$};
|
|
|
|
\draw[line width = 0.25mm, pattern=north west lines] (0, 0) -- (-0.15, -0.3) -- (0.15, -0.3) -- cycle;
|
|
|
|
|
|
\draw[color = black, opacity = 0.5] (1, 0.1) circle[radius=0.1];
|
|
\draw[line width = 0.25mm, pattern=north west lines, opacity = 0.5] (1, 0) -- (0.85, -0.3) -- (1.15, -0.3) -- cycle;
|
|
|
|
\draw[->, line width = 0.5mm] (1, 0) -- (1, -0.5) node[below] {$m_1$};
|
|
%\draw[->, line width = 0.5mm, dashed] (1, 0) -- (1, 0.5) node[above] {$-m_1$};
|
|
|
|
\fill[color = red] (1, 0) circle[radius=0.025];
|
|
\end{tikzpicture}
|
|
\end{center}
|
|
The pin exerts an opposing force on the mass at the same point, and the system thus stays still.
|
|
|
|
|
|
\remark{}<fakeunits>
|
|
Forces, distances, and torques in this handout will be provided in arbitrary (though consistent) units. \par
|
|
We have no need for physical units in this handout.
|
|
|
|
\example{}
|
|
Now attach this mass to a massless rod and try to balance the resulting system. \par
|
|
As you might expect, it is not stable: the rod pivots and falls down.
|
|
\begin{center}
|
|
\begin{tikzpicture}[scale=2]
|
|
\fill[color = black] (-0.3, 0.0) circle[radius=0.1];
|
|
\node[above] at (-0.3, 0.1) {$m_1$};
|
|
\draw[-, line width = 0.5mm] (-0.8, 0) -- (0.5, 0);
|
|
|
|
\draw[line width = 0.25mm, pattern=north west lines] (0, 0) -- (-0.15, -0.3) -- (0.15, -0.3) -- cycle;
|
|
|
|
|
|
\draw[color = black, opacity = 0.5] (1.2, 0.0) circle[radius=0.1];
|
|
\draw[-, line width = 0.5mm, opacity = 0.5] (0.7, 0) -- (1.9, 0);
|
|
|
|
\draw[line width = 0.25mm, pattern=north west lines, opacity = 0.5] (1.5, 0) -- (1.35, -0.3) -- (1.65, -0.3) -- cycle;
|
|
|
|
|
|
\draw[->, line width = 0.5mm] (1.2, 0) -- (1.2, -0.5) node[below] {$m_1$};
|
|
%\draw[->, line width = 0.5mm, dashed] (1.5, 0) -- (1.5, 0.5) node[above] {$f_p$};
|
|
\end{tikzpicture}
|
|
\end{center}
|
|
This is because the force $m_1$ is offset from the pivot (i.e, the tip of the pin). \par
|
|
It therefore exerts a \textit{torque} on the mass-rod system, causing it to rotate and fall.
|
|
|
|
\pagebreak
|
|
|
|
|
|
\definition{Torque}
|
|
Consider a rod on a single pivot point.
|
|
If a force with magnitude $m_1$ is applied at an offset $d$ from the pivot point,
|
|
the system experiences a \textit{torque} with magnitude $m_1 \times d$.
|
|
\begin{center}
|
|
\begin{tikzpicture}[scale=2]
|
|
\draw[-, line width = 0.5mm] (-1.2, 0) -- (0.5, 0);
|
|
\draw[line width = 0.25mm, pattern=north west lines] (0, 0) -- (-0.15, -0.3) -- (0.15, -0.3) -- cycle;
|
|
|
|
\draw[->, line width = 0.5mm, dashed] (-0.8, 0) -- (-0.8, -0.5) node[below] {$m_1$};
|
|
\fill[color = red] (-0.8, 0.0) circle[radius=0.05];
|
|
|
|
|
|
\draw[-, line width = 0.3mm, double] (-0.8, 0.1) -- (-0.8, 0.2) -- (0, 0.2) node [midway, above] {$d$} -- (0, 0.1);
|
|
\end{tikzpicture}
|
|
\end{center}
|
|
|
|
We'll say that a \textit{positive torque} results in \textit{clockwise} rotation,
|
|
and a \textit{negative torque} results in a \textit{counterclockwise rotation}.
|
|
As stated in \ref{fakeunits}, torque is given in arbitrary \say{torque units}
|
|
consistent with our units of distance and force.
|
|
|
|
\vspace{2mm}
|
|
|
|
% I believe the convention used in physics is opposite ours, but that's fine.
|
|
% Positive = clockwise is more intuitive given our setup,
|
|
% and we only use torque to define CoM anyway.
|
|
Look at the diagram above and convince yourself that this convention makes sense:
|
|
\begin{itemize}
|
|
\item $m_1$ is positive \note{(masses are usually positive)}
|
|
\item $d$ is negative \note{($m_1$ is \textit{behind} the pivot)}
|
|
\item therefore, $m_1 \times d$ is negative.
|
|
\end{itemize}
|
|
|
|
|
|
\definition{Center of mass}
|
|
The \textit{center of mass} of a physical system is the point at which one can place a pivot \par
|
|
so that the total torque the system experiences is 0. \par
|
|
\note{In other words, it is the point at which the system may be balanced on a pin.}
|
|
|
|
|
|
\problem{}
|
|
Consider the following physical system:
|
|
we have a massless rod of length $1$, with a mass of size 3 at position $0$
|
|
and a mass of size $1$ at position $1$.
|
|
Find the position of this system's center of mass. \par
|
|
|
|
\begin{center}
|
|
\begin{tikzpicture}[scale=2]
|
|
\draw[line width = 0.25mm, pattern=north west lines] (0, 0) -- (-0.15, -0.3) -- (0.15, -0.3) -- cycle;
|
|
|
|
\draw[-, line width = 0.5mm] (-0.5, 0) -- (1.5, 0);
|
|
|
|
|
|
\fill[color = black] (-0.5, 0) circle[radius=0.1];
|
|
\node[above] at (-0.5, 0.2) {$3$};
|
|
|
|
\fill[color = black] (1.5, 0) circle[radius=0.08];
|
|
\node[above] at (1.5, 0.2) {$1$};
|
|
\end{tikzpicture}
|
|
\end{center}
|
|
|
|
\vfill
|
|
|
|
\problem{}
|
|
Do the same for the following system, where $m_1$ and $m_2$ are arbitrary masses.
|
|
|
|
\begin{center}
|
|
\begin{tikzpicture}[scale=2]
|
|
\draw[line width = 0.25mm, pattern=north west lines] (0.7, 0) -- (0.55, -0.3) -- (0.85, -0.3) -- cycle;
|
|
|
|
\draw[-, line width = 0.5mm] (-0.5, 0) -- (1.5, 0);
|
|
|
|
|
|
\fill[color = black] (-0.5, 0) circle[radius=0.1];
|
|
\node[above] at (-0.5, 0.2) {$m_1$};
|
|
|
|
\fill[color = black] (1.5, 0) circle[radius=0.08];
|
|
\node[above] at (1.5, 0.2) {$m_2$};
|
|
\end{tikzpicture}
|
|
\end{center}
|
|
|
|
\vfill
|
|
\pagebreak
|
|
|
|
\problem{}<massline>
|
|
Consider a massless horizontal rod of infinite length. \par
|
|
Attach $n$ masses $m_1, m_2, ..., m_n$ to it, placing each $m_i$ at position $x_i$. \par
|
|
Find the resulting system's center of mass.
|
|
|
|
\vfill
|
|
|
|
\problem{}
|
|
Extend \ref{massline} into two dimensions: \par
|
|
Place $n$ masses $m_1, m_2, ..., m_n$ at positions $(x_1, y_1),~ (x_2, y_2),~ (x_3, y_3)$
|
|
on a massless plane. \par
|
|
Find the coordinates of the resulting system's center of mass. \par
|
|
\hint{If a plane balances on a pin, it does not tilt in the $x$ or $y$ direction.}
|
|
|
|
\vfill
|
|
\pagebreak |