Mark
/
Redox-From-Scratch
1
0
Fork 0
Code Issues Releases Activity
Redox-From-Scratch/tools/bin/x86_64-unknown-redox/toolchain/share/info/sframe-spec.info

916 lines
39 KiB
Plaintext
Raw Normal View History

Add tools
2024-12-16 20:57:17 -08:00
This is sframe-spec.info, produced by makeinfo version 6.8 from
sframe-spec.texi.
Copyright (C) 2021-2024 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU General Public License, Version 3 or any
later version published by the Free Software Foundation. A copy of the
license is included in the section entitled "GNU General Public
License".
INFO-DIR-SECTION Software development
START-INFO-DIR-ENTRY
* SFrame: (sframe-spec). The Simple Frame format.
END-INFO-DIR-ENTRY

File: sframe-spec.info, Node: Top, Next: Introduction, Up: (dir)
The SFrame format
*****************
This manual describes version 2 of the SFrame file format. SFrame
stands for Simple Frame. The SFrame format keeps track of the minimal
necessary information needed for generating stack traces:
- Canonical Frame Address (CFA).
- Frame Pointer (FP).
- Return Address (RA).
The reason for existence of the SFrame format is to provide a simple,
fast and low-overhead mechanism to generate stack traces.
* Menu:
* Introduction::
* SFrame Section::
* ABI/arch-specific Definition::
Appendices
* Generating Stack Traces using SFrame::
* Index::

File: sframe-spec.info, Node: Introduction, Next: SFrame Section, Prev: Top, Up: Top
1 Introduction
**************
* Menu:
* Overview::
* Changes from Version 1 to Version 2::

File: sframe-spec.info, Node: Overview, Next: Changes from Version 1 to Version 2, Up: Introduction
1.1 Overview
============
The SFrame stack trace information is provided in a loaded section,
known as the '.sframe' section. When available, the '.sframe' section
appears in a new segment of its own, PT_GNU_SFRAME.
The SFrame format is currently supported only for select ABIs,
namely, AMD64 and AAPCS64.
A portion of the SFrame format follows an unaligned on-disk
representation. Some data structures, however, (namely the SFrame
header and the SFrame function descriptor entry) have elements at their
natural boundaries. All data structures are packed, unless otherwise
stated.
The contents of the SFrame section are stored in the target
endianness, i.e., in the endianness of the system on which the section
is targeted to be used. An SFrame section reader may use the magic
number in the SFrame header to identify the endianness of the SFrame
section.
Addresses in this specification are expressed in bytes.
The rest of this specification describes the current version of the
format, 'SFRAME_VERSION_2', in detail. Additional sections outline the
major changes made to each previously published version of the SFrame
stack trace format.
The associated API to decode, probe and encode the SFrame section,
provided via 'libsframe', is not accompanied here at this time. This
will be added later.
This document is intended to be in sync with the C code in
'sframe.h'. Please report discrepancies between the two, if any.

File: sframe-spec.info, Node: Changes from Version 1 to Version 2, Prev: Overview, Up: Introduction
1.2 Changes from Version 1 to Version 2
=======================================
The following is a list of the changes made to the SFrame stack trace
format since Version 1 was published.
* Add an unsigned 8-bit integral field to the SFrame function
descriptor entry to encode the size of the repetitive code blocks.
Such code blocks, e.g, pltN entries, use an SFrame function
descriptor entry of type SFRAME_FDE_TYPE_PCMASK.
* Add an unsigned 16-bit integral field to the SFrame function
descriptor entry to serve as padding. This helps ensure natural
alignment for the members of the data structure.
* The above two imply that each SFrame function descriptor entry has
a fixed size of 20 bytes instead of its size of 17 bytes in SFrame
format version 1.
SFrame version 1 is now obsolete and should not be used.

File: sframe-spec.info, Node: SFrame Section, Next: ABI/arch-specific Definition, Prev: Introduction, Up: Top
2 SFrame Section
****************
The SFrame section consists of an SFrame header, starting with a
preamble, and two other sub-sections, namely the SFrame function
descriptor entry (SFrame FDE) sub-section, and the SFrame frame row
entry (SFrame FRE) sub-section.
* Menu:
* SFrame Preamble::
* SFrame Header::
* SFrame Function Descriptor Entries::
* SFrame Frame Row Entries::

File: sframe-spec.info, Node: SFrame Preamble, Next: SFrame Header, Up: SFrame Section
2.1 SFrame Preamble
===================
The preamble is a 32-bit packed structure; the only part of the SFrame
section whose format cannot vary between versions.
typedef struct sframe_preamble
{
uint16_t sfp_magic;
uint8_t sfp_version;
uint8_t sfp_flags;
} ATTRIBUTE_PACKED sframe_preamble;
Every element of the SFrame preamble is naturally aligned.
All values are stored in the endianness of the target system for
which the SFrame section is intended. Further details:
Offset Type Name Description
-------------------------------------------------------------------------------------
0x00 'uint16_t' 'sfp_magic' The magic number for SFrame section: 0xdee2.
Defined as a macro 'SFRAME_MAGIC'.
0x02 'uint8_t' 'sfp_version' The version number of this SFrame section.
*Note SFrame Version::, for the set of valid
values. Current version is
'SFRAME_VERSION_2'.
0x03 'uint8_t' 'sfp_flags' Flags (section-wide) for this SFrame
section. *Note SFrame Flags::, for the set
of valid values.
* Menu:
* SFrame Magic Number and Endianness::
* SFrame Version::
* SFrame Flags::

File: sframe-spec.info, Node: SFrame Magic Number and Endianness, Next: SFrame Version, Up: SFrame Preamble
2.1.1 SFrame Magic Number and Endianness
----------------------------------------
SFrame sections are stored in the target endianness of the system that
consumes them. A consumer library reading or writing SFrame sections
should detect foreign-endianness by inspecting the SFrame magic number
in the 'sfp_magic' field in the SFrame header. It may then provide
means to endian-flip the SFrame section as necessary.

File: sframe-spec.info, Node: SFrame Version, Next: SFrame Flags, Prev: SFrame Magic Number and Endianness, Up: SFrame Preamble
2.1.2 SFrame Version
--------------------
The version of the SFrame format can be determined by inspecting
'sfp_version'. The following versions are currently valid:
Version Name Number Description
------------------------------------------------------------------
'SFRAME_VERSION_1' 1 First version, obsolete.
'SFRAME_VERSION_2' 2 Current version, under development.
This document describes 'SFRAME_VERSION_2'.

File: sframe-spec.info, Node: SFrame Flags, Prev: SFrame Version, Up: SFrame Preamble
2.1.3 SFrame Flags
------------------
The preamble contains bitflags in its 'sfp_flags' field that describe
various section-wide properties.
The following flags are currently defined.
Flag Versions Value Meaning
----------------------------------------------------------------------------
'SFRAME_F_FDE_SORTED' All 0x1 Function Descriptor Entries
are sorted on PC.
'SFRAME_F_FRAME_POINTER' All 0x2 All functions in the object
file preserve frame
pointer.
The purpose of SFRAME_F_FRAME_POINTER flag is to facilitate stack
tracers to reliably fallback on the frame pointer based stack tracing
method, if SFrame information is not present for some function in the
SFrame section.
Further flags may be added in future.

File: sframe-spec.info, Node: SFrame Header, Next: SFrame Function Descriptor Entries, Prev: SFrame Preamble, Up: SFrame Section
2.2 SFrame Header
=================
The SFrame header is the first part of an SFrame section. It begins
with the SFrame preamble. All parts of it other than the preamble
(*note SFrame Preamble::) can vary between SFrame file versions. It
contains things that apply to the section as a whole, and offsets to the
various other sub-sections defined in the format. As with the rest of
the SFrame section, all values are stored in the endianness of the
target system.
The two sub-sections tile the SFrame section: each section runs from
the offset given until the start of the next section. An explicit
length is given for the last sub-section, the SFrame Frame Row Entry
(SFrame FRE) sub-section.
typedef struct sframe_header
{
sframe_preamble sfh_preamble;
uint8_t sfh_abi_arch;
int8_t sfh_cfa_fixed_fp_offset;
int8_t sfh_cfa_fixed_ra_offset;
uint8_t sfh_auxhdr_len;
uint32_t sfh_num_fdes;
uint32_t sfh_num_fres;
uint32_t sfh_fre_len;
uint32_t sfh_fdeoff;
uint32_t sfh_freoff;
} ATTRIBUTE_PACKED sframe_header;
Every element of the SFrame header is naturally aligned.
The sub-section offsets, namely 'sfh_fdeoff' and 'sfh_freoff', in the
SFrame header are relative to the _end_ of the SFrame header; they are
each an offset in bytes into the SFrame section where the SFrame FDE
sub-section and the SFrame FRE sub-section respectively start.
The SFrame section contains 'sfh_num_fdes' number of fixed-length
array elements in the SFrame FDE sub-section. Each array element is of
type SFrame function descriptor entry; each providing a high-level
function description for the purpose of stack tracing. More details in
a subsequent section. *Note SFrame Function Descriptor Entries::.
Next, the SFrame FRE sub-section, starting at offset 'sfh_fre_off',
describes the stack trace information for each function, using a total
of 'sfh_num_fres' number of variable-length array elements. Each array
element is of type SFrame frame row entry. *Note SFrame Frame Row
Entries::.
SFrame header allows specifying explicitly the fixed offsets from
CFA, if any, from which FP or RA may be recovered. For example, in
AMD64, the stack offset of the return address is 'CFA - 8'. Since these
offsets are expected to be in close vicinity to the CFA in most ABIs,
'sfh_cfa_fixed_fp_offset' and 'sfh_cfa_fixed_ra_offset' are limited to
signed 8-bit integers.
The SFrame format has made some provisions for supporting more
ABIs/architectures in the future. One of them is the concept of the
auxiliary SFrame header. Bytes in the auxiliary SFrame header may be
used to convey further ABI-specific information. The 'sframe_header'
structure provides an unsigned 8-bit integral field to denote the size
(in bytes) of an auxiliary SFrame header. The auxiliary SFrame header
follows right after the 'sframe_header' structure. As for the
calculation of the sub-section offsets, namely 'sfh_fdeoff' and
'sfh_freoff', the _end_ of SFrame header must be the end of the
auxiliary SFrame header, if the latter is present.
Putting it all together:
Offset Type Name Description
-------------------------------------------------------------------------------------
0x00 'sframe_ 'sfh_preamble' The SFrame preamble.
preamble' *Note SFrame Preamble::.
0x04 'uint8_t' 'sfh_abi_arch' The ABI/arch identifier.
*Note SFrame ABI/arch Identifier::.
0x05 'int8_t' 'sfh_cfa_fixed_fp_offset' The CFA fixed FP offset, if any.
0x06 'int8_t' 'sfh_cfa_fixed_ra_offset' The CFA fixed RA offset, if any.
0x07 'uint8_t' 'sfh_auxhdr_len' Size in bytes of the auxiliary
header that follows the
'sframe_header' structure.
0x08 'uint32_t' 'sfh_num_fdes' The number of SFrame FDEs in the
section.
0x0c 'uint32_t' 'sfh_num_fres' The number of SFrame FREs in the
section.
0x10 'uint32_t' 'sfh_fre_len' The length in bytes of the
SFrame FRE sub-section.
0x14 'uint32_t' 'sfh_fdeoff' The offset in bytes to the
SFrame FDE sub-section.
0x18 'uint32_t' 'sfh_freoff' The offset in bytes to the
SFrame FRE sub-section.
* Menu:
* SFrame ABI/arch Identifier::

File: sframe-spec.info, Node: SFrame ABI/arch Identifier, Up: SFrame Header
2.2.1 SFrame ABI/arch Identifier
--------------------------------
SFrame header identifies the ABI/arch of the target system for which the
executable and hence, the stack trace information contained in the
SFrame section, is intended. There are currently three identifiable
ABI/arch values in the format.
ABI/arch Identifier Value Description
---------------------------------------------------------------------
'SFRAME_ABI_AARCH64_ENDIAN_BIG' 1 AARCH64 big-endian
'SFRAME_ABI_AARCH64_ENDIAN_LITTLE' 2 AARCH64 little-endian
'SFRAME_ABI_AMD64_ENDIAN_LITTLE' 3 AMD64 little-endian
The presence of an explicit identification of ABI/arch in SFrame may
allow stack trace generators to make certain ABI/arch-specific
decisions.

File: sframe-spec.info, Node: SFrame Function Descriptor Entries, Next: SFrame Frame Row Entries, Prev: SFrame Header, Up: SFrame Section
2.3 SFrame FDE
==============
The SFrame function descriptor entry sub-section is an array of the
fixed-length SFrame function descriptor entries (SFrame FDEs). Each
SFrame FDE is a packed structure which contains information to describe
a function's stack trace information at a high-level.
The array of SFrame FDEs is sorted on the 'sfde_func_start_address'
if the SFrame section header flag 'sfp_flags' has 'SFRAME_F_FDE_SORTED'
set. Typically (as is the case with GNU ld) a linked object or
executable will have the 'SFRAME_F_FDE_SORTED' set. This makes the job
of a stack tracer easier as it may then employ binary search schemes to
look for the pertinent SFrame FDE.
typedef struct sframe_func_desc_entry
{
int32_t sfde_func_start_address;
uint32_t sfde_func_size;
uint32_t sfde_func_start_fre_off;
uint32_t sfde_func_num_fres;
uint8_t sfde_func_info;
uint8_t sfde_func_rep_size;
uint16_t sfde_func_padding2;
} ATTRIBUTE_PACKED sframe_func_desc_entry;
Every element of the SFrame function descriptor entry is naturally
aligned.
'sfde_func_start_fre_off' is the offset to the first SFrame FRE for
the function. This offset is relative to the _end of the SFrame FDE_
sub-section (unlike the sub-section offsets in the SFrame header, which
are relative to the _end_ of the SFrame header).
'sfde_func_info' is the SFrame FDE "info word", containing
information on the FRE type and the FDE type for the function *Note The
SFrame FDE Info Word::.
Apart from the 'sfde_func_padding2', the SFrame FDE has some
currently unused bits in the SFrame FDE info word, *Note The SFrame FDE
Info Word::, that may be used for the purpose of extending the SFrame
file format specification for future ABIs.
Following table describes each component of the SFrame FDE structure:
Offset Type Name Description
----------------------------------------------------------------------------------------------
0x00 'int32_t' 'sfde_func_start_address' Signed 32-bit integral field denoting the
virtual memory address of the described
function.
0x04 'uint32_t' 'sfde_func_size' Unsigned 32-bit integral field specifying
the size of the function in bytes.
0x08 'uint32_t' 'sfde_func_start_fre_off' Unsigned 32-bit integral field specifying
the offset in bytes of the function's
first SFrame FRE in the SFrame section.
0x0c 'uint32_t' 'sfde_func_num_fres' Unsigned 32-bit integral field specifying
the total number of SFrame FREs used for
the function.
0x10 'uint8_t' 'sfde_func_info' Unsigned 8-bit integral field specifying
the SFrame FDE info word.
*Note The SFrame FDE Info Word::.
0x11 'uint8_t' 'sfde_func_rep_size' Unsigned 8-bit integral field specifying
the size of the repetitive code block for
which an SFrame FDE of type
SFRAME_FDE_TYPE_PCMASK is used. For
example, in AMD64, the size of a pltN
entry is 16 bytes.
0x12 'uint16_t' 'sfde_func_padding2' Padding of 2 bytes. Currently unused
bytes.
* Menu:
* The SFrame FDE Info Word::
* The SFrame FDE Types::
* The SFrame FRE Types::

File: sframe-spec.info, Node: The SFrame FDE Info Word, Next: The SFrame FDE Types, Up: SFrame Function Descriptor Entries
2.3.1 The SFrame FDE Info Word
------------------------------
The info word is a bitfield split into three parts. From MSB to LSB:
Bit offset Name Description
----------------------------------------------------------------------------------------
7-6 'unused' Unused bits.
5 'pauth_key' (For AARCH64) Specify which key is used for signing the
return addresses in the SFrame FDE. Two possible values:
SFRAME_AARCH64_PAUTH_KEY_A (0), or
SFRAME_AARCH64_PAUTH_KEY_B (1).
Ununsed in AMD64.
4 'fdetype' Specify the SFrame FDE type. Two possible values:
SFRAME_FDE_TYPE_PCMASK (1), or
SFRAME_FDE_TYPE_PCINC (0).
*Note The SFrame FDE Types::.
0-3 'fretype' Choice of three SFrame FRE types.
*Note The SFrame FRE Types::.

File: sframe-spec.info, Node: The SFrame FDE Types, Next: The SFrame FRE Types, Prev: The SFrame FDE Info Word, Up: SFrame Function Descriptor Entries
2.3.2 The SFrame FDE Types
--------------------------
The SFrame format defines two types of FDE entries. The choice of which
SFrame FDE type to use is made based on the instruction patterns in the
relevant program stub.
An SFrame FDE of type 'SFRAME_FDE_TYPE_PCINC' is an indication that
the PCs in the FREs should be treated as increments in bytes. This is
used fo the the bulk of the executable code of a program, which contains
instructions with no specific pattern.
In contrast, an SFrame FDE of type 'SFRAME_FDE_TYPE_PCMASK' is an
indication that the PCs in the FREs should be treated as masks. This
type is useful for the cases where a small pattern of instructions in a
program stub is used repeatedly for a specific functionality. Typical
usecases are pltN entries and trampolines.
Name of SFrame FDE Value Description
type
---------------------------------------------------------------------------
SFRAME_FDE_TYPE_PCINC 0 Stacktracers perform a
(PC >= FRE_START_ADDR) to look up a
matching FRE.
SFRAME_FDE_TYPE_PCMASK 1 Stacktracers perform a
(PC % REP_BLOCK_SIZE
>= FRE_START_ADDR) to look up a
matching FRE. REP_BLOCK_SIZE is the
size in bytes of the repeating block of
program instructions and is encoded via
'sfde_func_rep_size' in the SFrame FDE.

File: sframe-spec.info, Node: The SFrame FRE Types, Prev: The SFrame FDE Types, Up: SFrame Function Descriptor Entries
2.3.3 The SFrame FRE Types
--------------------------
A real world application can have functions of size big and small.
SFrame format defines three types of SFrame FRE entries to effeciently
encode the stack trace information for such a variety of function sizes.
These representations vary in the number of bits needed to encode the
start address offset in the SFrame FRE.
The following constants are defined and used to identify the SFrame
FRE types:
Name Value Description
-------------------------------------------------------------------------------
'SFRAME_FRE_TYPE_ADDR1' 0 The start address offset (in bytes) of the
SFrame FRE is an unsigned 8-bit value.
'SFRAME_FRE_TYPE_ADDR2' 1 The start address offset (in bytes) of the
SFrame FRE is an unsigned 16-bit value.
'SFRAME_FRE_TYPE_ADDR4' 2 The start address offset (in bytes) of the
SFrame FRE is an unsigned 32-bit value.
A single function must use the same type of SFrame FRE throughout.
The identifier to reflect the chosen SFrame FRE type is stored in the
'fretype' bits in the SFrame FDE info word, *Note The SFrame FDE Info
Word::.

File: sframe-spec.info, Node: SFrame Frame Row Entries, Prev: SFrame Function Descriptor Entries, Up: SFrame Section
2.4 SFrame FRE
==============
The SFrame frame row entry sub-section contains the core of the stack
trace information. An SFrame frame row entry (FRE) is a self-sufficient
record containing SFrame stack trace information for a range of
contiguous (instruction) addresses, starting at the specified offset
from the start of the function.
Each SFrame FRE encodes the stack offsets to recover the CFA, FP and
RA (where applicable) for the respective instruction addresses. To
encode this information, each SFrame FRE is followed by S*N bytes,
where:
- 'S' is the size of a stack offset for the FRE, and
- 'N' is the number of stack offsets in the FRE
The entities 'S', 'N' are encoded in the SFrame FRE info word, via
the 'fre_offset_size' and the 'fre_offset_count' respectively. More
information about the precise encoding and range of values for 'S' and
'N' is provided later in the *Note The SFrame FRE Info Word::.
It is important to underline here that although the canonical
interpretation of these bytes is as stack offsets (to recover CFA, FP
and RA), these bytes _may_ be used by future ABIs/architectures to
convey other information on a per SFrame FRE basis.
In summary, SFrame file format, by design, supports a variable number
of stack offsets at the tail end of each SFrame FRE. To keep the SFrame
file format specification flexible yet extensible, the interpretation of
the stack offsets is ABI/arch-specific. The precise interpretation of
the FRE stack offsets in the currently supported ABIs/architectures is
covered in the ABI/arch-specific definition of the SFrame file format,
*Note ABI/arch-specific Definition::.
Next, the definitions of the three SFrame FRE types are as follows:
typedef struct sframe_frame_row_entry_addr1
{
uint8_t sfre_start_address;
sframe_fre_info sfre_info;
} ATTRIBUTE_PACKED sframe_frame_row_entry_addr1;
typedef struct sframe_frame_row_entry_addr2
{
uint16_t sfre_start_address;
sframe_fre_info sfre_info;
} ATTRIBUTE_PACKED sframe_frame_row_entry_addr2;
typedef struct sframe_frame_row_entry_addr4
{
uint32_t sfre_start_address;
sframe_fre_info sfre_info;
} ATTRIBUTE_PACKED sframe_frame_row_entry_addr4;
For ensuring compactness, SFrame frame row entries are stored
unaligned on disk. Appropriate mechanisms need to be employed, as
necessary, by the serializing and deserializing entities, if unaligned
accesses need to be avoided.
'sfre_start_address' is an unsigned 8-bit/16-bit/32-bit integral
field identifies the start address of the range of program counters, for
which the SFrame FRE applies. The value encoded in the
'sfre_start_address' field is the offset in bytes of the start address
of the SFrame FRE, from the start address of the function.
Further SFrame FRE types may be added in future.
* Menu:
* The SFrame FRE Info Word::

File: sframe-spec.info, Node: The SFrame FRE Info Word, Up: SFrame Frame Row Entries
2.4.1 The SFrame FRE Info Word
------------------------------
The SFrame FRE info word is a bitfield split into four parts. From MSB
to LSB:
Bit offset Name Description
-------------------------------------------------------------------------------------
7 'fre_mangled_ra_p' Indicate whether the return address is
mangled with any authorization bits (signed
RA).
5-6 'fre_offset_size' Size of stack offsets in bytes. Valid values
are:
SFRAME_FRE_OFFSET_1B,
SFRAME_FRE_OFFSET_2B, and
SFRAME_FRE_OFFSET_4B.
1-4 'fre_offset_count' A max value of 15 is allowed. Typically, a
value of upto 3 is sufficient for most ABIs
to track all three of CFA, FP and RA.
0 'fre_cfa_base_reg_id' Distinguish between SP or FP based CFA
recovery.
Name Value Description
--------------------------------------------------------------------------------
'SFRAME_FRE_OFFSET_1B' 0 All stack offsets following the fixed-length
FRE structure are 1 byte long.
'SFRAME_FRE_OFFSET_2B' 1 All stack offsets following the fixed-length
FRE structure are 2 bytes long.
'SFRAME_FRE_OFFSET_4B' 2 All stack offsets following the fixed-length
FRE structure are 4 bytes long.

File: sframe-spec.info, Node: ABI/arch-specific Definition, Next: Generating Stack Traces using SFrame, Prev: SFrame Section, Up: Top
3 ABI/arch-specific Definition
******************************
This section covers the ABI/arch-specific definition of the SFrame file
format.
Currently, the only part of the SFrame file format definition that is
ABI/arch-specific is the interpretation of the variable number of bytes
at the tail end of each SFrame FRE. Currently, these bytes are only used
for representing stack offsets (for all the currently supported ABIs).
It is recommended to peruse this section along with *Note SFrame Frame
Row Entries:: for clarity of context.
Future ABIs must specify the algorithm for identifying the
appropriate SFrame FRE stack offsets in this chapter. This should
inevitably include the blueprint for interpreting the variable number of
bytes at the tail end of the SFrame FRE for the specific ABI/arch. Any
further provisions, e.g., using the auxiliary SFrame header, etc., if
used, must also be outlined here.
* Menu:
* AMD64::
* AArch64::

File: sframe-spec.info, Node: AMD64, Next: AArch64, Up: ABI/arch-specific Definition
3.1 AMD64
=========
Irrespective of the ABI, the first stack offset is always used to locate
the CFA, by interpreting it as: CFA = 'BASE_REG' + offset1. The
identification of the 'BASE_REG' is done by using the
'fre_cfa_base_reg_id' field in the SFrame FRE info word.
In AMD64, the return address (RA) is always saved on stack when a
function call is executed. Further, AMD64 ABI mandates that the RA be
saved at a 'fixed offset' from the CFA when entering a new function.
This means that the RA does not need to be tracked per SFrame FRE. The
fixed offset is encoded in the SFrame file format in the field
'sfh_cfa_fixed_ra_offset' in the SFrame header. *Note SFrame Header::.
Hence, the second stack offset (in the SFrame FRE), when present,
will be used to locate the FP, by interpreting it as: FP = CFA +
offset2.
Hence, in summary:
Offset ID Interpretation in AMD64
-----------------------------------------------
1 CFA = 'BASE_REG' + offset1
2 FP = CFA + offset2

File: sframe-spec.info, Node: AArch64, Prev: AMD64, Up: ABI/arch-specific Definition
3.2 AArch64
===========
Irrespective of the ABI, the first stack offset is always used to locate
the CFA, by interpreting it as: CFA = 'BASE_REG' + offset1. The
identification of the 'BASE_REG' is done by using the
'fre_cfa_base_reg_id' field in the SFrame FRE info word.
In AARCH64, the AAPCS64 standard specifies that the Frame Record
saves both FP and LR (a.k.a the RA). However, the standard does not
mandate the precise location in the function where the frame record is
created, if at all. Hence the need to track RA in the SFrame stack
trace format. As RA is being tracked in this ABI, the second stack
offset is always used to locate the RA, by interpreting it as: RA = CFA
+ offset2. The third stack offset will be used to locate the FP, by
interpreting it as: FP = CFA + offset3.
Given the nature of things, the number of stack offsets seen on
AARCH64 per SFrame FRE is either 1 or 3.
Hence, in summary:
Offset ID Interpretation in AArch64
---------------------------------------------
1 CFA = 'BASE_REG' + offset1
2 RA = CFA + offset2
3 FP = CFA + offset3

File: sframe-spec.info, Node: Generating Stack Traces using SFrame, Next: Index, Prev: ABI/arch-specific Definition, Up: Top
Appendix A Generating Stack Traces using SFrame
***********************************************
Using some C-like pseudocode, this section highlights how SFrame
provides a simple, fast and low-overhead mechanism to generate stack
traces. Needless to say that for generating accurate and useful stack
traces, several other aspects will need attention: finding and decoding
bits of SFrame section(s) in the program binary, symbolization of
addresses, to name a few.
In the current context, a 'frame' is the abstract construct that
encapsulates the following information:
- program counter (PC),
- stack pointer (SP), and
- frame pointer (FP)
With that said, establishing the first 'frame' should be trivial:
// frame 0
frame->pc = current_IP;
frame->sp = get_reg_value (REG_SP);
frame->fp = get_reg_value (REG_FP);
where 'REG_SP' and 'REG_FP' are are ABI-designated stack pointer and
frame pointer registers respectively.
Next, given frame N, generating stack trace needs us to get frame
N+1. This can be done as follows:
// Get the PC, SP, and FP for frame N.
pc = frame->pc;
sp = frame->sp;
fp = frame->fp;
// Populate frame N+1.
int err = get_next_frame (&next_frame, pc, sp, fp);
where given the values of the program counter, stack pointer and
frame pointer from frame N, 'get_next_frame' populates the provided
'next_frame' object and returns the error code, if any. In the
following pseudocode for 'get_next_frame', the 'sframe_*' functions
fetch information from the SFrame section.
fre = sframe_find_fre (pc);
if (fre)
// Whether the base register for CFA tracking is REG_FP.
base_reg_val = sframe_fre_base_reg_fp_p (fre) ? fp : sp;
// Get the CFA stack offset from the FRE.
cfa_offset = sframe_fre_get_cfa_offset (fre);
// Get the fixed RA offset or FRE stack offset as applicable.
ra_offset = sframe_fre_get_ra_offset (fre);
// Get the fixed FP offset or FRE stack offset as applicable.
fp_offset = sframe_fre_get_fp_offset (fre);
cfa = base_reg_val + cfa_offset;
next_frame->sp = cfa;
ra_stack_loc = cfa + ra_offset;
// Get the address stored in the stack location.
next_frame->pc = read_value (ra_stack_loc);
if (fp_offset is VALID)
fp_stack_loc = cfa + fp_offset;
// Get the value stored in the stack location.
next_frame->fp = read_value (fp_stack_loc);
else
// Continue to use the value of fp as it has not
// been clobbered by the current frame yet.
next_frame->fp = fp;
else
ret = ERR_NO_SFRAME_FRE;

File: sframe-spec.info, Node: Index, Prev: Generating Stack Traces using SFrame, Up: Top
Index
*****
[index]
* Menu:
* ABI/arch-specific Definition: ABI/arch-specific Definition.
(line 6)
* Changes from Version 1 to Version 2: Changes from Version 1 to Version 2.
(line 6)
* endianness: SFrame Magic Number and Endianness.
(line 6)
* Introduction: Introduction. (line 6)
* Overview: Overview. (line 6)
* Provisions for future ABIs: SFrame Header. (line 59)
* Provisions for future ABIs <1>: SFrame Function Descriptor Entries.
(line 41)
* Provisions for future ABIs <2>: SFrame Frame Row Entries.
(line 25)
* SFrame ABI/arch Identifier: SFrame ABI/arch Identifier.
(line 6)
* SFrame FDE: SFrame Function Descriptor Entries.
(line 6)
* SFrame Flags: SFrame Flags. (line 6)
* SFrame FRE: SFrame Frame Row Entries.
(line 6)
* SFrame header: SFrame Header. (line 6)
* SFrame magic number: SFrame Magic Number and Endianness.
(line 6)
* SFrame preamble: SFrame Preamble. (line 6)
* SFrame Section: SFrame Section. (line 6)
* SFrame versions: SFrame Version. (line 9)
* SFRAME_ABI_AARCH64_ENDIAN_BIG: SFrame ABI/arch Identifier.
(line 13)
* SFRAME_ABI_AARCH64_ENDIAN_LITTLE: SFrame ABI/arch Identifier.
(line 16)
* SFRAME_ABI_AMD64_ENDIAN_LITTLE: SFrame ABI/arch Identifier.
(line 18)
* SFRAME_FDE_TYPE_PCINC: The SFrame FDE Types. (line 6)
* SFRAME_FDE_TYPE_PCMASK: The SFrame FDE Types. (line 6)
* SFRAME_FRE_OFFSET_1B: The SFrame FRE Info Word.
(line 31)
* SFRAME_FRE_OFFSET_2B: The SFrame FRE Info Word.
(line 35)
* SFRAME_FRE_OFFSET_4B: The SFrame FRE Info Word.
(line 38)
* SFRAME_FRE_TYPE_ADDR1: The SFrame FRE Types. (line 17)
* SFRAME_FRE_TYPE_ADDR2: The SFrame FRE Types. (line 21)
* SFRAME_FRE_TYPE_ADDR4: The SFrame FRE Types. (line 24)
* SFRAME_F_FDE_SORTED: SFrame Flags. (line 11)
* SFRAME_F_FRAME_POINTER: SFrame Flags. (line 14)
* SFRAME_MAGIC: SFrame Preamble. (line 24)
* SFRAME_VERSION_1: SFrame Version. (line 9)
* The SFrame FDE Info Word: SFrame Function Descriptor Entries.
(line 85)
* The SFrame FRE Info Word: SFrame Frame Row Entries.
(line 74)

Tag Table:
Node: Top564
Node: Introduction1232
Node: Overview1418
Node: Changes from Version 1 to Version 22984
Node: SFrame Section3955
Node: SFrame Preamble4454
Node: SFrame Magic Number and Endianness6021
Node: SFrame Version6553
Node: SFrame Flags7130
Node: SFrame Header8145
Node: SFrame ABI/arch Identifier13571
Node: SFrame Function Descriptor Entries14599
Node: The SFrame FDE Info Word19043
Node: The SFrame FDE Types20257
Node: The SFrame FRE Types22079
Node: SFrame Frame Row Entries23567
Node: The SFrame FRE Info Word26619
Node: ABI/arch-specific Definition28697
Node: AMD6429792
Node: AArch6430892
Node: Generating Stack Traces using SFrame32101
Node: Index35122

End Tag Table

Local Variables:
coding: utf-8
End: