#include #include #include #include // For reading FIFO #include #include // Local files #include "utility/bitmap.hpp" #include "utility/buffer.hpp" #include "signal_processing/fft.hpp" #include "ergodox.hpp" #include "commands.h" // TODO: // stereo support (and maybe different bitrates?) // Optimization: don't copy filename in buffer? // understand consumption rate // understand BIN2HZ // understand values and sizes (DFT_TOTAL, DFT_NONZERO, etc) // note that wave and spectrum have different sizes // // MPD interface // hid interface to keyboard // beat detection void draw_spectrum_bitmap( const std::vector& waveform, Bitmap& bitmap ) { for (size_t x = 0; x < waveform.size(); x++) { for (size_t y = 0; y < waveform[x]; y++) { bitmap.setpixel(bitmap.get_height() - y - 1, x, 0xFF, 0x00, 0x00); } } } // How many keys in a column * resolution per key. // this MUST fit inside a uint8_t. const uint8_t kb_resolution = 5 * 50; // How many resolution steps to skip at the top and bottom. const size_t bottom_skip = 25; const size_t top_skip = 50; const size_t width = 10; const size_t height = bottom_skip + kb_resolution + top_skip; int main(int argc, char *argv[]) { // buffer size for waveform: // (44100 / fps * 10), make 10 bigger for slower scrolling // // Double both buffer sizes if stereo // FFT generator FFT_Visualizer fft = FFT_Visualizer( width, height, 100, 5000 ); // Audio buffer Buffer buf = Buffer( "/tmp/mpd.fifo", 44100 / 2, // Keep 500ms of data in buffer fft.compute_buffer_output_size() ); // HID interface wrapper Ergodox Dox = Ergodox::init( 0x3297, 0x4976, 0x61, 0xFF60 ); // Write buffer uint8_t hid_buf[12]; while (1) { if (Dox.get_animation_mode() == 0x02) { buf.update(); fft.update(buf); hid_buf[0] = CMD_ANIM_DATA_fft; for (size_t i = 0; i < 10; i++) { // Get height from fft, apply bottom_skip ssize_t h = fft.get_output()[i] - bottom_skip; // Enforce max and min // max implicitly enforces top_skip h = h>kb_resolution ? kb_resolution : h; h = h<0 ? 0 : h; hid_buf[i + 1] = h; } Dox.write(CMD_ANIM_DATA, hid_buf, 13); } // Read a packet if there is a packet to read if (Dox.read()) { uint8_t cmd = Dox.read_buf[0]; switch(cmd) { case CMD_SEND_STATE: break; } } } return 0; }