#pragma once
#include "config_common.h"



// USB parameters
#define VENDOR_ID       0x3297 // ZSA Labs
#define PRODUCT_ID      0x4976 // Ergodox glow variant
#define DEVICE_VER      0x0002
#define MANUFACTURER    Betalupi
#define PRODUCT         Betalupi ErgoDox
#define WEBUSB_LANDING_PAGE_URL u8"betalupi.com"
#define USB_MAX_POWER_CONSUMPTION 500
#define USB_SUSPEND_WAKEUP_DELAY 0

// raw HID params
#define RAW_USAGE_PAGE 0xFF60
#define RAW_USAGE_ID 0x61


// Key matrix info
#define MATRIX_ROWS 14
#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
#define MATRIX_COLS 6
#define COL_EXPANDED { true, true, true, true, true, true, true, false, false, false, false, false, false, false }
#define MATRIX_ONBOARD_ROW_PINS { 0, 0, 0, 0, 0, 0, 0, B0,  B1,  B2,  B3,  D2,  D3,  C6 }
#define MATRIX_ONBOARD_COL_PINS { F0,  F1,  F4,  F5,  F6,  F7 }
#define DIODE_DIRECTION COL2ROW
#define EXPANDER_COL_REGISTER GPIOB
#define EXPANDER_ROW_REGISTER GPIOA
#define MATRIX_EXPANDER_COL_PINS { 5, 4, 3, 2, 1, 0 }
#define MATRIX_EXPANDER_ROW_PINS { 0, 1, 2, 3, 4, 5, 6 }


// The debounce filtering reports a key/switch change directly,
// without any extra delay. After that the debounce logic will filter
// all further changes, until the key/switch reports the same
// state for the given count of scans.
//
// A perfect switch will get a short debounce period and
// bad key will get a much longer debounce period.
//
// The result is an adaptive debouncing period for each switch.
// If you don't define it here, the matrix code will default to
// 5, which is now closer to 10ms, but still plenty according to
// manufacturer specs.
#define DEBOUNCE 30



// Feature parameters
#define TAPPING_TOGGLE  1
#define TAPPING_TERM    200

// This makes it possible to do rolling combos (zx)
// with keys that convert to other keys on hold
// (z becomes ctrl when you hold it, and when this option isn't
// enabled, z rapidly followed by x actually sends Ctrl-x)
#define IGNORE_MOD_TAP_INTERRUPT

#define MOUSEKEY_INTERVAL           20
#define MOUSEKEY_DELAY              0
#define MOUSEKEY_TIME_TO_MAX        100
#define MOUSEKEY_MAX_SPEED          5
#define MOUSEKEY_WHEEL_DELAY        400
#define MOUSEKEY_WHEEL_INTERVAL     MOUSEKEY_INTERVAL
#define MOUSEKEY_WHEEL_MAX_SPEED    MOUSEKEY_MAX_SPEED
#define MOUSEKEY_WHEEL_TIME_TO_MAX  MOUSEKEY_TIME_TO_MAX



// Ergodox indicator LEDs
#define LED_BRIGHTNESS_LO       5
#define LED_BRIGHTNESS_HI       100
#define LED_BRIGHTNESS_DEFAULT (LED_BRIGHTNESS_LO)



// RGBLight (Underglow) config
#define RGBLED_NUM 8
#define RGB_DI_PIN D7

#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 16
#define RGBLIGHT_VAL_STEP 10
// Max brightness
#define RGBLIGHT_LIMIT_VAL 200

//#define RGBLIGHT_OFF_AT_START
//#define RGBLIGHT_NO_EEPROM

// Prevents RGB keycodes from affecting underglow.
// This allows us to control RGBMatrix and RGBLight seperately
// with custom macros defined in betalupi_ergodox.c
#define RGBLIGHT_DISABLE_KEYCODES

// The underglow LEDs I used for the backlight mod aren't RGBW,
// undef this just to be sure.
#undef RGBW
#define RGBLIGHT_SLEEP



// RGBMatrix (Key light) config
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 24
#define DRIVER_2_LED_TOTAL 24
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

#define RGB_MATRIX_HUE_STEP 10
#define RGB_MATRIX_SAT_STEP 16
#define RGB_MATRIX_VAL_STEP 16
#define RGB_MATRIX_STARTUP_SPD 60

// limits the number of LEDs to process in an animation per task run
// (increases keyboard responsiveness)
#define RGB_MATRIX_LED_PROCESS_LIMIT 5

// limits in milliseconds how frequently an animation will update the LEDs.
// 16 (16ms) is equivalent to limiting to 60fps
// (increases keyboard responsiveness)
#define RGB_MATRIX_LED_FLUSH_LIMIT 26

// turn off effects when suspended
#define RGB_DISABLE_WHEN_USB_SUSPENDED true



// Misc
/* key combination for command */
#define IS_COMMAND() ( \
    get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
    get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)

// Not sure what this does.
// ZSA says: "fixes space cadet rollover issue"
#define DISABLE_SPACE_CADET_ROLLOVER



// Disable unnecessary features
//#define NO_DEBUG
//#define NO_PRINT
//#define DEBUG_MATRIX_SCAN_RATE

//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION