keyboards/betalupi_ergodox/config.h

@@ -121,7 +121,7 @@
 // limits in milliseconds how frequently an animation will update the LEDs.
 // 16 (16ms) is equivalent to limiting to 60fps
 // (increases keyboard responsiveness)
-#define RGB_MATRIX_LED_FLUSH_LIMIT 16
+#define RGB_MATRIX_LED_FLUSH_LIMIT 26
 
 // turn off effects when suspended
 #define RGB_DISABLE_WHEN_USB_SUSPENDED true

keyboards/betalupi_ergodox/keymaps/default/keymap.c

@@ -1,8 +1,6 @@
 #include "keymap.h"
 #include "layers/layers.h"
 
-#include "spellcheck.h"
-
 // Values that should not be saved to git.
 // Create a `secrets.h` in the keymap directory.
 //
@@ -33,6 +31,9 @@ void matrix_scan_user(void) {
 		//	unregister_code(KC_S);
 		//	unregister_code(KC_LGUI);
 		//}
+
+
+
 	}
 }
 
@@ -41,7 +42,6 @@ void matrix_scan_user(void) {
 // Return FALSE to halt key processing,
 // Return TRUE to allow QMK to handle keypress.
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	if (!process_spellcheck(keycode, record)) { return false; }
 
 	// Handle macros
 	switch (keycode) {
@@ -53,7 +53,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
 		case M_SHUTDOWN:
 			if (record->event.pressed) {
-				SEND_STRING(SS_LGUI(SS_TAP(X_P)) SS_DELAY(100) SS_TAP(X_Y) SS_DELAY(100) SS_TAP(X_ENTER));
+				SEND_STRING(SS_LGUI(SS_TAP(X_P)) SS_DELAY(100) SS_TAP(X_Y)  SS_DELAY(100) SS_TAP(X_ENTER));
 			}
 			return false;
 

keyboards/betalupi_ergodox/keymaps/default/rules.mk

@@ -6,5 +6,4 @@ TAP_DANCE_ENABLE = yes
 SRC += \
 	tapdance/wmlayout.c \
 	tapdance/tapdance.c \
-	layers/layers.c \
-	spellcheck.c
+	layers/layers.c

keyboards/betalupi_ergodox/keymaps/default/spellcheck.c

@@ -1,110 +0,0 @@
-#include "spellcheck.h"
-#include "rawhid.h"
-
-uint8_t spellcheck_buffer[SPELLCHECK_BUFFER_MAX] = {0};
-uint8_t spellcheck_buffer_size = 0;
-
-bool process_spellcheck(uint16_t keycode, keyrecord_t* record) {
-
-
-	// Ignore key release; we only process key presses.
-	if (!record->event.pressed) { return true; }
-
-#ifndef NO_ACTION_ONESHOT
-	const uint8_t mods = get_mods() | get_oneshot_mods();
-#else
-	const uint8_t mods = get_mods();
-#endif
-
-
-	// Disable autocorrection while a mod other than shift is active.
-	if ((mods & ~MOD_MASK_SHIFT) != 0) {
-		spellcheck_buffer_size = 0;
-		return true;
-	}
-
-	// The following switch cases address various kinds of keycodes. This logic is
-	// split over two switches rather than merged into one. The first switch may
-	// extract a basic keycode which is then further handled by the second switch,
-	// e.g. a layer-tap key with Caps Lock `LT(layer, KC_CAPS)`.
-	switch (keycode) {
-#ifndef NO_ACTION_TAPPING
-		case QK_MOD_TAP ... QK_MOD_TAP_MAX:  // Tap-hold keys.
-#ifndef NO_ACTION_LAYER
-		case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
-#endif
-	// Ignore when tap-hold keys are held.
-			if (record->tap.count == 0) { return true; }
-	// Otherwise when tapped, get the basic keycode.
-	// Fallthrough intended.
-#endif
-
-		// Handle shifted keys, e.g. symbols like KC_EXLM = S(KC_1).
-		case QK_LSFT ... QK_LSFT + 255:
-		case QK_RSFT ... QK_RSFT + 255:
-			keycode &= 0xff;  // Get the basic keycode.
-			break;
-
-	// NOTE: Space Cadet keys expose no info to check whether they are being
-	// tapped vs. held. This makes autocorrection ambiguous, e.g. KC_LCPO might
-	// be '(', which we would treat as a word break, or it might be shift, which
-	// we would treat as having no effect. To behave cautiously, we allow Space
-	// Cadet keycodes to fall to the logic below and clear autocorrection state.
-	}
-
-	switch (keycode) {
-		// Ignore shifts, Caps Lock, one-shot mods, and layer switch keys.
-		case KC_NO:
-		case KC_LSFT:
-		case KC_RSFT:
-		case KC_CAPS:
-		case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX:
-		case QK_TO ... QK_TO_MAX:
-		case QK_MOMENTARY ... QK_MOMENTARY_MAX:
-		case QK_DEF_LAYER ... QK_DEF_LAYER_MAX:
-		case QK_TOGGLE_LAYER ... QK_TOGGLE_LAYER_MAX:
-		case QK_ONE_SHOT_LAYER ... QK_ONE_SHOT_LAYER_MAX:
-		case QK_LAYER_TAP_TOGGLE ... QK_LAYER_TAP_TOGGLE_MAX:
-		case QK_LAYER_MOD ... QK_LAYER_MOD_MAX:
-		return true;  // Ignore these keys.
-	}
-
-	if (keycode == KC_QUOT) {
-		// Treat " (shifted ') as a word boundary.
-		if ((mods & MOD_MASK_SHIFT) != 0) { keycode = KC_SPC; }
-	} else if (!(KC_A <= keycode && keycode <= KC_Z)) {
-		if (keycode == KC_BSPC) {
-			// Remove last character from the buffer.
-			if (spellcheck_buffer_size > 0) { --spellcheck_buffer_size; }
-			return true;
-		} else if (KC_1 <= keycode && keycode <= KC_SLSH && keycode != KC_ESC) {
-			// Set a word boundary if space, period, digit, etc. is pressed.
-			// Behave more conservatively for the enter key. Reset, so that enter
-			// can't be used on a word ending.
-			if (keycode == KC_ENT) { spellcheck_buffer_size = 0; }
-			keycode = KC_SPC;
-		} else {
-			// Clear state if some other non-alpha key is pressed.
-			spellcheck_buffer_size = 0;
-			return true;
-		}
-	}
-
-	// If the buffer is full, rotate it to discard the oldest character.
-	if (spellcheck_buffer_size >= SPELLCHECK_BUFFER_MAX) {
-		memmove(spellcheck_buffer, spellcheck_buffer + 1, SPELLCHECK_BUFFER_MAX - 1);
-		spellcheck_buffer_size = SPELLCHECK_BUFFER_MAX - 1;
-	}
-
-	// NOTE: `keycode` must be a basic keycode (0-255) by this point.
-
-	// A to Z keycodes
-	if (keycode >= 0x04 && keycode <= 0x1D) {
-		spellcheck_buffer[spellcheck_buffer_size++] = (uint8_t) keycode;
-	} else if (spellcheck_buffer_size > 0) {
-		hid_send_word();
-		spellcheck_buffer_size = 0;
-	}
-
-	return true;
-}

keyboards/betalupi_ergodox/keymaps/default/spellcheck.h

@@ -1,15 +0,0 @@
-#pragma once
-#include "quantum.h"
-
-
-// spellcheck_buffer holds keycode history.
-// It can only contain values 0x00 - 0xFF, aka standard usb hid codes.
-// Host software is responsible for turning this into a usable string.
-//
-// Note that SOME preprocessing is done,see spellcheck.c
-#define SPELLCHECK_BUFFER_MAX 16
-uint8_t spellcheck_buffer[SPELLCHECK_BUFFER_MAX];
-uint8_t spellcheck_buffer_size;
-
-
-bool process_spellcheck(uint16_t keycode, keyrecord_t* record);

keyboards/betalupi_ergodox/rawhid.c

@@ -1,8 +1,6 @@
 #include "rawhid.h"
 #include "extra_mappings.h"
 
-#include "spellcheck.h"
-
 // See rawhid.h for prococol documentation
 void raw_hid_receive(uint8_t *data, uint8_t length) {
 	uint8_t cmd = data[0];
@@ -22,14 +20,6 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
 			break;
 		#endif
 
-		case CMD_SPELLCHECK_WORD:
-			if (data[1]) {
-				ergodox_right_led_1_on();
-				_delay_ms(50);
-				ergodox_right_led_1_off();
-			}
-			break;
-
 		default:
 			break;
 	}
@@ -71,20 +61,6 @@ void hid_send_state() {
 }
 
 
-void hid_send_word() {
-	uint8_t packet[RAW_EPSIZE] = {
-		CMD_SPELLCHECK_WORD,
-		spellcheck_buffer_size
-	};
-
-	for (int i = 0; i < 2 + spellcheck_buffer_size; i++) {
-		packet[i + 2] = spellcheck_buffer[i];
-	}
-
-	raw_hid_send(packet, RAW_EPSIZE);
-}
-
-
 
 #ifdef RGB_MATRIX_FRAMEBUFFER_EFFECTS
 

keyboards/betalupi_ergodox/rawhid.h

@@ -5,7 +5,6 @@
 
 void raw_hid_receive(uint8_t *data, uint8_t length);
 void hid_send_state(void);
-void hid_send_word(void);
 
 
 void cmd_animation(uint8_t *data, uint8_t length);
@@ -44,23 +43,6 @@ extern uint8_t g_rgb_frame_buffer[MATRIX_ROWS][MATRIX_COLS];
 // 0x02: FFT Animation
 #define CMD_SEND_STATE 0x02
 
-// Sent by keyboard to host when a complete word is typed.
-// Host checks if this is a known word.
-// If it is not, host responds with the same CMD (see below).
-//
-// Packet structure (sent by keyboard):
-// Data:		| cmd | word length |  keycodes  |
-// # of Bytes:	|  1  |      1      |     ?      |
-//
-// word length: number of bytes in `keycodes` block
-//
-//
-// Packet structure (sent by host):
-// Data:		| cmd | typo? |
-// # of Bytes:	|  1  |   1   |
-//
-// typo: If this is 0x01, the word we got was a typo.
-#define CMD_SPELLCHECK_WORD 0x04
 
 // Animation data. Sent by host.
 //

keyboards/betalupi_ergodox/readme.md

@@ -45,3 +45,33 @@ LIGHT_SPI, // Increase backlight speed
 LIGHT_SPD, // Decrease backlight speed
 LIGHT_MOD, // Change backlight animation mode
 ```
+
+--------------------------------------------------------------------------------
+# Notes from ZSA
+
+
+### Indicator LEDs
+
+You can use the `LED_LEVEL` keycode to cycle through the brightness levels for the LEDs on the top right of the keyboard.  These settings are saved in eeprom (persistant memory).
+
+Alternatively, you can set the brightness by calling the following functions:
+
+```c
+void ergodox_led_all_set(uint8_t level);
+void ergodox_right_led_1_set(uint8_t level);
+void ergodox_right_led_2_set(uint8_t level);
+void ergodox_right_led_3_set(uint8_t level);
+```
+
+These settings are not persistent, so you'd need to reset it every time the board starts.
+
+These are on a 0-255 scale
+
+
+### RGB Matrix Features
+
+If you're using the Smart LED (layer indication) feature from the Oryx Configurator, you want to make sure that you enable these options by adding `#define ORYX_CONFIGURATOR` to your keymap's `config.h`.
+
+This changes the `RGB_TOG` keycode so that it will toggle the lights on and off, in a way that will allow the Smart LEDs to continue to work, even with the rest of the LEDs turned off.
+
+Additionally, a new keycode has been added to toggle the Smart LEDs.  Use `TOGGLE_LAYER_COLOR`, if you aren't already.