From 12e65bf02b2475fd9acb31df7b6e006519926d7f Mon Sep 17 00:00:00 2001 From: Mark Date: Wed, 20 Jul 2022 21:12:32 -0700 Subject: [PATCH] Cleaned up README --- keyboards/betalupi_ergodox/readme.md | 30 ---------------------------- 1 file changed, 30 deletions(-) diff --git a/keyboards/betalupi_ergodox/readme.md b/keyboards/betalupi_ergodox/readme.md index d65ce08..f60482a 100644 --- a/keyboards/betalupi_ergodox/readme.md +++ b/keyboards/betalupi_ergodox/readme.md @@ -45,33 +45,3 @@ LIGHT_SPI, // Increase backlight speed LIGHT_SPD, // Decrease backlight speed LIGHT_MOD, // Change backlight animation mode ``` - --------------------------------------------------------------------------------- -# Notes from ZSA - - -### Indicator LEDs - -You can use the `LED_LEVEL` keycode to cycle through the brightness levels for the LEDs on the top right of the keyboard. These settings are saved in eeprom (persistant memory). - -Alternatively, you can set the brightness by calling the following functions: - -```c -void ergodox_led_all_set(uint8_t level); -void ergodox_right_led_1_set(uint8_t level); -void ergodox_right_led_2_set(uint8_t level); -void ergodox_right_led_3_set(uint8_t level); -``` - -These settings are not persistent, so you'd need to reset it every time the board starts. - -These are on a 0-255 scale - - -### RGB Matrix Features - -If you're using the Smart LED (layer indication) feature from the Oryx Configurator, you want to make sure that you enable these options by adding `#define ORYX_CONFIGURATOR` to your keymap's `config.h`. - -This changes the `RGB_TOG` keycode so that it will toggle the lights on and off, in a way that will allow the Smart LEDs to continue to work, even with the rest of the LEDs turned off. - -Additionally, a new keycode has been added to toggle the Smart LEDs. Use `TOGGLE_LAYER_COLOR`, if you aren't already.